Project Diva Panel

From Rhythm Cons Wiki

This page lists details related to the official Project Diva panel, taken off an arcade cabinet.

Basics

The touch slider requires a 12v power supply and communicates via serial. You can hook it up to a PC using pins 2, 3 and 5 on an RS232 cable.

The buttons are photointerrupters which require a 5v power supply, and the leds inside require a 12v power supply.

There is also a 3.5mm audio jack socket on the panel.

Cable Harness Connectors

The items below are to mate with the stock harness. Do not order them unless your panel came with the harness.

5v Power + Buttons Connector

  • YLR-16V Qty 1
  • SYM-01T-P0.5A Qty 8 (26-20 AWG)
    OR
    YM-41T-P0.5A Qty 8 (20-16 AWG)

12v Power + Leds Connector

  • YLR-08V Qty 1
  • SYM-01T-P0.5A Qty 6 (26-20 AWG)
    OR
    YM-41T-P0.5A Qty 6 (20-16 AWG)

Serial Connector

  • SMP-05V-NC Qty 1
  • SHF-001T-0.8BS Qty 3 (28-22 AWG)

Headphone Connector

  • SMP-03V-NC Qty 1
  • SHF-001T-0.8BS Qty 3 (28-22 AWG)

Pinout

Facing the YLP-16V connector from the panel :

 ______¯¯¯¯¯______
| B x x x x 5 3 x |
| C A x x x 6 4 2 |
------------------

2 square button
3 +5V (all buttons)
4 cross button
5 start button
6 circle button
A GND
B triangle button
C GND
Facing the YLP-08V connector from the panel :

 ___¯¯¯____
| x x 3 1 |
| 8 6 4 2 |
-----------

1 +12v (touch slider)
2 triangle button LED -
3 +12v (all button LEDs)
4 square button LED -
6 cross button LED -
8 circle button LED -