Faucetwo

This page lists troubleshooting and known issues with the Faucetwo.

Issues are user reported and are not independently verified.

Contents

My knobs aren’t responding at all

Try holding Start, BT-A, BT-B, BT-C, BT-D, FX-L, and FX-R for 10 seconds. This will swap between encoder and potentiometer mode.

How are the buttons wired to the board?

Start goes to 1, BT-A through BT-D are 2-5, and FX-L and FX-R are 6-7.

Mode 2 and HID Mode Issues

It is reported that Mode 2 and HID mode do not work with USB 2.0 ports and require a USB 3.0 port.

Chord Splitting

It is reported that when all 4 BT buttons are pressed, the controller will chord split, resulting in delayed reports back to the game and up to 4ms of error.

My Lower Knob / Encoder Bracket Cracked!

A 3D-print replacement can be found here: https://github.com/Umi4Life/F2-Knob-Housing